Onboard Glow Plug Driver RCM Labs GDL V6.9 Standard

Description

World most reliable and durable glow plug driver.
Set-up instructions and detailed tech specs can be found here: https://rcmlabs.ru/glowdriver9en.html
Key benefits:
small and lightweight
does not affect the model exterior
impossible to burn out the glow plug by inaccurate settings
no buttons or pots (points of failure) on the board
no complicated wiring
no soldering required
virtually indestructible
adopts
only high quality branded components (Infineon, NXP, Murata, etc.)
totally controlled from the ground by aircraft transmitter
2S LiPo glow plug driver for fixed wing RC aircraft.
This extremely lightweight robust and easy to use glow driver system designed to eliminate the need of external handheld glow igniters or start panels for starting methanol engines and also can be set up to automatically control the glow plug power at idle or low RPM.
All operations and adjustments can be made remotely by the aircraft transmitter.
All you need for full-featured operation is one TX channel with switch ("fulltime-on", for starting the engine or "throttle-controlled" for normal flight) and one free mixer that "mirrors" the throttle channel. Both reversing and off-point can be set by REV and TRIM transmitter settings respectively, on the TX channel this driver board is connected to.
This kit can be seamlessly integrated in your aircraft as a replacement of existing driver you may not like, using already installed wires, or as a new setup if you prefer to use your own wiring system. And of course, you'll need to change the battery to small 2s LiPo. (500mAh 10C will be perfect for full day operation.)
And yeah! Still NO soldering required! You can upgrade your aircraft in 5 minutes or less, right on the field!
What's in the package:
- one GDL V6.9 board
- one mini screw driver
- one decorative self adhesive sticker for your aircraft