m0n0wall (monowall) 800MHz Router / Firewall - VPN,VLAN

Description

These small and silent embedded PCs come with
m0n0wall version 1.8.1
(or later) pre-installed on the ATA Disk-On-Module (Flash / SSD). They were built from refurbished thin client computers. They are fully tested and are guaranteed to be in full working condition. They come with everything needed to be up and running as a m0n0wall Firewall/Router (including ac adapter)
You will need to setup the initial IP address by hooking up a keyboard and monitor. After that you can configure everything remotely using the included web administration utility. (for samples of configuration see the m0n0wall screenshots/documentation linked to below)
I have personally been using one of these network appliances (as my only firewall/router) without a problem for the last 6-7 years now. I used to have to reboot my Linksys router every couple of weeks due to it hanging or crashing. When I switching to one of these units I have not once had to reboot (the router). In fact my m0n0wall router hasn't been off since the last time I lost power (several months ago).
These are
REALLY SILENT PCs
. Except for the power LED, I wouldn't be able to tell when they are on.
These are
POWER EFFICIENT PCs
. Using a watt-meter, I measured the power at the wall at about 15-20 watts!
These units are complete Single Board Computers, and can be re-configured with several different operating systems including MANY specialized Linux/FreeBSD Distros. You can also download an image of Windows XP Embedded from HP's website (you would need a larger flash disk).
Hardware Specifications:
Processor
800 MHz
VIA Eden C3 (x86) processor with
PASSIVE HEATINK (Fanless! Silent PC!)
System Memory
256 MB
RAM, (upgrade-able to 1 GB)
Network Connectivity
2x (Dual) 10/100 NIC (LAN/WAN), RJ-45
Additional
LAN or WIFI
ports are available through the PCI slot or USB adapters
Storage
32 MB (or larger) ATA Disk-On-Module
flashed with the latest m0n0wall firmware (currently 1.8.1)
1x 44 pin IDE connector
(supports 2 IDE devices, currently housing the ata disk-on-module)
Expansion Slot
1 PCI slot
(currently housing the 2nd 10/100 NIC)
I/O Connectors
2x USB 1.1
(add a USB NIC or WIFI adapter)
2x Serial ports
(console support)
VGA port
(console support)
1 Parallel port
PS/2 Keyboard and Mouse
(console support)
Audio connectors
Dimensions
11.375" (W) x 9.0" (D) x 2.125" (H)
(About the size of a text-book)
Weight
6 lbs 2.5 oz
Operating System
Pre-loaded with the latest version of the open source m0n0wall project (1.8.1 or later) (See below for details)
Upgrades (Please message first):
- Upgrade to 256 MB DiskOnModule
- Upgrade to 512 MB DiskOnModule
- Upgrade to 1 GB DiskOnModule (I can also pre-install
pfSense 2.2.6 nanobsd
instead of m0n0wall)
- Upgrade from 256 MB RAM to 512 MB RAM
- Upgrade from 256 MB RAM to 1 GB RAM
- Upgrade to dual 2x Gigabit PCI NIC (3 total RJ-45 ports - WAN/LAN/OPT1)
*** NOTE *** Upgrade quantities may be limited, so make sure and send a message to me to ensure I have stock on hand. If you do want an upgrade, wait for me to send an invoice showing the total price before sending payment.
m0n0wall (
http://m0n0.ch/wall
) provides many of the features of expensive commercial  firewalls, including:
web interface (supports SSL)
serial console interface for recovery
set LAN IP address
reset password
restore factory defaults
reboot system
wireless support (access point  with PRISM-II/2.5/3 cards, BSS/IBSS with other cards including Cisco)
captive portal
802.1Q VLAN support
stateful packet filtering
block/pass rules
logging
NAT/PAT (including 1:1)
DHCP client, PPPoE, PPTP and Telstra BigPond Cable support on the WAN interface
IPsec VPN tunnels (IKE; with support for hardware crypto cards,  mobile clients and certificates)
PPTP VPN (with RADIUS server support)
static routes
DHCP server and relay
caching DNS forwarder
DynDNS client and RFC 2136 DNS updater
SNMP agent
traffic shaper
SVG-based traffic grapher
firmware upgrade through the web browser
Wake on LAN client
configuration backup/restore
host/network aliases
Click on an image for a larger version
Click on an image for a larger version