kintsugi easy repair complete kit for begginer w/ gold powder from japan urushi

Description

Modern Kintsugi repair kit
Description
Reference movie:
https://youtu.be/tnQ-nueCIyo
Set contents
1、modern Japanese lacquer(included gold colored brass powder)
2,thinner for modern japanese lacquer
3,waterproof sandpaper No.400
4,putty
5,brush
This is a synthetic Japanese lacqer (shin urushi).  It's not authentic Japanese lacquer.  It has the following advantages and disadvantages.
【merit】
Very short time to cure
Hard to get allergies
Affordable
[Disadvantage] Since it contains a small amount of lead, it is not recommended to use it where the mouth touches.
The paint film is not as strong (feels) as real lacquer.
How to Kintsugi, golden joinery,
to
treat breakages and repair pottery.
●STEP1●
Wash the cracked parts well
.
Clean the cracked parts.
(The
adhesive property gets weakened when the surface is rough.)
●STEP2●
Prepare the putty (synthetic resin).
The synthetic resin consists of two layers,
the white layer and the gray layer.
It
will not harden if it is not thoroughly mixed.
●STEP3●
Knead the putty(synthetic resin)
.
Measure out enough putty to repair the
chipped parts, and roll the putty quickly with
your fingers.
Knead the putty until it becomes uniformly
one color
(about 1 minute)
●STEP4●
Fill the chipped parts
.
Once the putty(synthetic resin) is uniform
color,
roll it into a small ball shape and press
it against the chipped part.
The size of a small
ball shape which is slightly larger than the
chipped part leads good finish.
●STEP5●
Finish the surface.
The putty (synthetic resin) hardens very
quickly.
The trick is to
finish filling the chipped parts
in about three minutes or less.
●STEP6●
Sand with water-resistant paper
.
Sand the surface while lubricating
the water-resistant paper with
clean water.
Be careful not to scratch other objects.
●STEP7●
Mix gold powder and Shin Urushi(new
Japanese lacquer)
Mix using a one to one ratio between golden
powder and Shin Urushi(new Japanese
lacquer) .
Adjust the concentration by adding som
drops of diluent.
The concentration is perfect when the
brushmark slip quickly fades.
●STEP8●
Put golden lacquer on the putty
(synthetic resin).
Apply the new gold Japanese
lacquer so that it completely
covers the sealant.
It is "placing" rather than "painting".
●STEP9●
Completed when it is
dry
Dry in the open air for one or two days,
then it's done.
Polish part of Kintsugi golden joinery)
by a
soft cloth with olive oil to make it shine.
Do not put in the microwave or in the
dishwasher.
Payment
PAYPAL Only(Please pay within 3days after auction is finished)
Shipping
Worldwide Shipping
Economy  Shipping?International e packet
Delivery Time:
approximate 7-21days(To USA)
14-21days(To Europe)
With Tracking Number & NO Insurance
International
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.