Juniper SRX240 SRX240H 16-Port Secure Services Gateway w/ 3 x SRX-MP-1T1E1

Description

You are viewing a Juniper
SRX240 SRX240H 16-Port Secure Services Gateway w/ 3 x SRX-MP-1T1E1.
This unit is in great shape and guaranteed working.  Please see system information from console boot session below.  The unit includes rack ears and power cord.  If you have any questions please do not hesitate to contact me.  Thank you for viewing my listing!
Listing Includes:
Juniper SRX240 SRX240H 16-Port Secure Services Gateway w/ 3 x SRX-MP-1T1E1
Console Session:
U-Boot 1.1.6-JNPR-1.7 (Build time: May  4 2010 - 06:59:58)
SRX_240_HIGHMEM board revision major:1, minor:42, serial #: AACW6560
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM:  1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash:  4 MB
USB:   scanning bus for devices...
Root Hub 0: 3 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net:   octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (246092 bytes)
Loading .rodata @ 0x8f03c1c4 (13940 bytes)
Loading .rodata.str1.4 @ 0x8f03f838 (16580 bytes)
Loading set_Xcommand_set @ 0x8f0438fc (104 bytes)
Loading .rodata.cst4 @ 0x8f043964 (20 bytes)
Loading .data @ 0x8f044000 (5620 bytes)
Loading .data.rel.ro @ 0x8f0455f4 (120 bytes)
Loading .data.rel @ 0x8f04566c (136 bytes)
Clearing .bss @ 0x8f0456f8 (11912 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 1.7
FreeBSD/MIPS U-Boot bootstrap loader, Revision 1.7
, Tue May  4 07:15:51 UTC 2010)
Memory: 1024MB
[0]Booting from nand-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
Loading /boot/defaults/loader.conf
/kernel data=0x97d8ac+0xd70d0 syms=[0x4+0x79c50+0x4+0xadd2e]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000d8 ...
getbootinfo: magic 0x0 md 0x80c7e000 memsize 0x0
getbootinfo: boothowto 0x1000 kernend 0x80d00000 memsize 1024MB kernelname /kernel
Platform Starting
init regular console
Initializing octeon watchdog
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
getmemsize: msgbufp[size=32768] = 0x8000cfe4
Copyright (c) 1996-2010, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 10.2R3.10 #0: 2010-10-16 20:36:59 UTC
:/volume/build/junos/10.2/release/10.2R3.10/obj-octeon/bsd/sys/compile/JSRXNLE
JUNOS 10.2R3.10 #0: 2010-10-16 20:36:59 UTC
:/volume/build/junos/10.2/release/10.2R3.10/obj-octeon/bsd/sys/compile/JSRXNLE
real memory  = 1073741824 (1024MB)
avail memory = 527577088 (503MB)
cpuid: 0, btlb_cpumap:0xffffffff
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Initializing watchdog interupt
Loading RT Fifo module.....
Loaded RT Fifo module
pmap_helper loaded (interface version 6, syscall 210)
cpu0 on motherboard
: CAVIUM's Octeon CPU Rev. 0.8 with no FPU implemented
L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
L2 Cache: Size 128kb, ? way
obio0 on motherboard
uart0: on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: on obio0
usb0: DWC OTG Controller
Using DMA mode
Init: Port Power? op_state=1
Init: Power Port (0)
usb0: on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 3 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682  High Speed Mode, rev 2.00/2.10, addr 3
dwc1: on obio0
usb1: DWC OTG Controller
Using DMA mode
Init: Port Power? op_state=1
Init: Power Port (0)
usb1: on dwc1
usb1: USB revision 2.0
uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
pcib1: on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 2 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 1 lanes
pcib1: Initialized controller
pci0: on pcib1
pcib2: at device 0.0 on pci0
pci1: on pcib2
pci1: at device 2.0 (no driver attached)
pci1: at device 7.0 (no driver attached)
pcib0: on obio0
pci2: on pcib0
pci2: at device 0.0 (no driver attached)
cpld0 on obio0
gblmem0 on obio0
octpkt0: on obio0
cfi0: on obio0
platform_cookie_read not implemented
Timecounter "mips" frequency 600000000 Hz quality 0
Timecounters tick every 1.000 msec
Loading the NETPFE ethernet module
Loading E1/T1/J1 driver
Loading the DS1/E1 Media Layer; Attaching to media services layer
Loading common multilink module.
Loading the NETPFE PPPoE module
Loading the netpfe services driver
Loading the NETPFE docsis module
Loading DS0 driver
Loading the DS0 Media Layer; Attaching to media services layer
Loading the XDSL Media Layer; Attaching to media services layer
Loading the IPSec driver
Loading the PTM driver
Loading the DIALER driver
Loading the ISDN driver
Loading the ISDN BRI Media Layer; Attaching to media services layer
Loading Link Services PICs module.
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to create bootdev, rootpartition da0s1a
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md0...
Media check on da0
Zone 04 Block 0943 Addr 13af00 : Bad read
Recovering block
Zone 05 Block 0997 Addr 17e500 : Bad read
Recovering block
Automatic reboot in progress...
** /dev/da0s1a
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
133 files, 103910 used, 46124 free (36 frags, 5761 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
Verified junos signed by PackageProduction_10_2_0
Verified jboot signed by PackageProduction_10_2_0
Verified junos-10.2R3.10-domestic signed by PackageProduction_10_2_0
** /dev/bo0s3e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
12 files, 17 used, 12485 free (13 frags, 1559 blocks, 0.1% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
** /dev/bo0s3f
** Last Mounted on /cf/var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
436 files, 6026 used, 169288 free (280 frags, 21126 blocks, 0.2% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
Loading configuration ...
mgd: commit complete
Setting initial options:  debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons:  usbd.
Doing initial network setup:.
Initial interface configuration:
additional daemons: eventd.
savecore: /dev/bo0s1b: No such file or directory
savecore: Reboot reason(s): 0x1: power cycle/failure
savecore: no dumps found
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot//kernel;/boot/modules;/modules
.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.mips initialization:.
Local package initialization:.
starting local daemons:.
kern.securelevel: -1 -> 1
Creating JAIL MFS partition...
JAIL MFS partition created
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 46244 free (20 frags, 5778 blocks, 0.0% fragmentation)
Wed Apr 28 20:22:16 EDT 2021
BCEC (ttyu0)
login: