Cisco, ASA5510 Security Appliance ASA5510-BUN-K9

Description

Unit has a broken faceplate and flash eject button.
Have been reset to factory default settings and are ready to be configured
Returns accepted, buyer pays shipping
ciscoasa# sho ver
Cisco Adaptive Security Appliance Software Version 7.1(2)
Device Manager Version 5.1(2)
Compiled on Tue 14-Mar-06 17:00 by dalecki
System image file is "disk0:/asa712-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 8 mins 26 secs
Hardware:   ASA5510, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 64MB
BIOS Flash AT49LW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode   : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: Ethernet0/0         : address is 0018.199e.7218, irq 9
1: Ext: Ethernet0/1         : address is 0018.199e.7219, irq 9
2: Ext: Ethernet0/2         : address is 0018.199e.721a, irq 9
3: Ext: Not licensed        : irq 9
4: Ext: Management0/0       : address is 0018.199e.7217, irq 11
5: Int: Not licensed        : irq 11
6: Int: Not licensed        : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 4
Maximum VLANs               : 10
Inside Hosts                : Unlimited
Failover                    : Disabled
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
Security Contexts           : 0
GTP/GPRS                    : Disabled
VPN Peers                   : 250
WebVPN Peers                : 2
This platform has a Base license.
Serial Number: JMX1024K17F
Running Activation Key: 0x3c112a6d 0x94c6fdef 0xd4211de4 0x899c5808 0x0637d09f
Configuration register is 0x1
Configuration has not been modified since last system restart.
ciscoasa#